Robust Shuttle EN01J4 industrijsko računalo VESA/DIN-Rail
Robust Shuttle EN01J4 indurstrijsko računalo VESA/DIN-Rail
Shuttle EN01J4 je bez ventilatora IPC u robusni 450 ml metalnoj kutiji i namijenjen je ugradnji na šinu DIN/VESA .
Fleksibilan je u uporabi i dizajniran je za rad bez prekida 24 sata dnevno, na sobnoj temperaturi do 50 ° C.
Unutar se nalazi ploča procesora s Intelovim procesorom “Apollo Lake” i prijenosnom pločom s nekoliko I / O priključaka i čitačem kartica.
Opcionalne mogućnosti uključuju drugi LAN priključak s PoE funkcijom, LTE / WLAN funkcijom i video snimanje putem HDMI-a.
Ovaj je proizvod usmjeren na profesionalne aplikacije (IoT gateway), automatizacija, digitalna signalizacija, kontrola, evidencija podataka i video nadzor.
Za konfiguracije po vašoj potrebi i za druge dodatne informacije kontaktirajte nas info@krajnik.hr
- Fanless and silent
Completely fanless, virtually noiseless
Large aluminium heatsink
Chassis
Black aluminium and steel
Dimensions: 92.4 x 54.4 x 90 mm (LWH) = 450 ml - Operation System
It is compatible with:
– Windows 10 (64-bit)
– Linux (64-bit) - Processor
Intel® Pentium® processor J4205, Quad Core
CPU clock frequency: 1.5 GHz, max. Turbo frequency: 2.6 GHz - Integrated Graphics
Intel® HD Graphics 500 (Intel Gen 9), graphics frequency: 250~700 MHz
UEFI Firmware
16 MB Flash ROM with AMI UEFI BIOS Firmware
RAM Memory
8 GB LPDDR4 RAM memory (2400 MHz), soldered - Flash Memory
64 GB eMMC flash memory
Expandable via Micro SD card - Micro SD Card Reader
Integrated card reader
Supports Micro SD, Micro SDHC and Micro SDXC memory flash cards
Supports booting from SD card - Wired Network
RJ45 connector supports Gigabit LAN at 10/100/1000 Mbit/s.Connectors
– HDMI 1.4b digital video and audio output
– 2x USB 3.2 Gen 1 Type A
– Micro USB 2.0
– Micro SD card reader
– Gigabit network port (LAN, RJ45)
– DC input (2-pin Euroblock)
– 4x perforated 6.5 mm holes for optional LTE/4G antennas
– Hole for Kensington Lock - Onboard I/O connector
34-pin header “J1” with I/O ports as follows:
– Power Button (pin 11)
– Always-on function (pin 29-30 shortened by jumper)
– RS232 3.3V (pin 2, 4, 6, 8)
– RS232/422/485 3.3V (pin 31, 32, 33, 34)
– 4x GPIO 1.8V (pin 21 ,23, 25, 27)
– I2C bus (pin 22, 24)
